Matrox DualHead2Go User Manual page 13

Problem Matrox product isn't automatically detected
1
Cause
Your Matrox product may not support the selected display mode or the graphics hardware in
your computer.
1
Solution
Make sure your Matrox product supports the selected display mode. For more information,
see "Supported display modes", page
2
Solution
Make sure your Matrox product supports your graphics hardware.
Problem Program window or dialog box doesn't appear on screen
1
Cause
Another window or dialog box may be covering the window or dialog box you want to see.
1
Solution
Move, close, or minimize any window or dialog box that may be covering the window or
dialog box you want to see.
2
Cause
If you're using multi-display mode, the program window or dialog box may be in a display
or on a monitor that's unusable. (For example, your monitor may not be properly connected
or configured.)
1
Solution
Make sure all the displays and monitors you want to use are usable. For more information,
see other troubleshooting items in this guide.
3
Cause
The program window or dialog box may be somewhere off-screen.
1
Solution
If the program window you want to see is named on the Windows taskbar, right-click on it
and select
position. To fix this problem, see the other solutions.)
2
Solution
Manually move the program window or dialog box:
Press [Alt]+[Space].
1
If you see a pop-up menu, click
2
Move
Press one of the arrow keys once and move your mouse pointer to where you want the
3
window or dialog box to appear, then click. The program window or dialog box should
appear where you clicked.
3
Solution
1 Click the Matrox PowerDesk icon (
Management
Enable one or more of the following features:
2
Open program windows
Center dialog boxes and message boxes
. (If you click
Maximize
).
.
15.
the program window goes back to its previous
Restore
. If you don't see a pop-up menu, press [M] (for
Move
) on your Windows taskbar, then click
Matrox DualHead2Go – User Guide 13
Desktop