Connection Setup; Connection Overview - Dualhead2Go Analog Edition - Matrox DualHead2Go User Manual

Connection setup

This section describes how to connect monitors to your Matrox product.
Note:
monitors at a time to your Matrox product. To get the most out of your Matrox product,
we recommend you use two identical monitors (that is, monitors that support the same
settings such as display resolution and refresh rate). For information on the settings your
monitor supports, see your monitor documentation.
WARNING:
your computer is turned on, it may be using monitor settings that are specific to the current
monitor connections. Some devices may be permanently damaged if incorrect settings are
used.
Connection overview – DualHead2Go Analog Edition
USB cable
Matrox cable
Step-by-step connection setup – DualHead2Go Analog Edition
Turn off computer
1
Before you connect your Matrox product, make sure you shut down your system and turn off
your computer.
Depending on your Matrox product, you can connect up to 2 analog or digital
Don't change monitor connections while your computer is turned on. While
Monitor cable
(HD-15)
Monitor cable
(HD-15)
Matrox DualHead2Go – User Guide 3