SERVICE
•
Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power
tool is maintained.
•
Follow instructions in the Maintenance section of this manual. Use of
parts not listed in this manual or failure to follow Maintenance instructions
may create a risk of shock or injury.
SPECIFIC SAFETY RULES FOR PIVOTING SCREWDRIVER
•
Hold the power tool by the insulated gripping surfaces when
performing an operation where the fastener may contact hidden wiring.
Fasteners contacting a live wire may make exposed metal parts of the
power tool live and could give the operator an electric shock.
•
Secure the workpiece. Clamping devices or a vise will hold the workpiece
in place better than the hand.
•
Always wait until the machine has come to a complete stop before
placing it down. The tool insert can jam and lead to loss of control over the
power tool.
•
Before performing any kind of work on the machine (e.g., maintenance,
tool change, etc.), as well as when transporting and storing it, always
set the lock-off slide at the locked position. Unintentional activation of
the On/Off switch may result in personal injury.
•
Use protective gloves when removing the bit from the tool, or first
allow the clamp to cool down. The bit may be hot after prolonged use.
•
Protect the battery from heat and fire. There is risk of explosion.
37810 Manual_Revised_13-0116
Page 9