Craftsman 320.37810 Operator's Manual page 15

GRIPPING THE
SCREWDRIVER (Fig. 5)
Determine the best grip for your
job according to the working
conditions (Fig. 5).
As the handle is pivoted to the
desired position, you will hear a
"click" to indicate the handle has
been locked.
ѥ
WARNING: Never place your
finger near the the hinge when
pivoting the handle. Doing so can
result in your finger being pinched
or cut.
TIGHTEN/LOOSEN THE
SCREW (Figs. 6 and 7)
1. Install the correct bit.
2. Select Forward rotation to
tighten or Reverse rotation
to loosen.
3. Lock in the best grip angle
for your job.
4. Apply just enough pressure
to the screw to keep the bit
engaged on the screw.
5. Turn on the screwdriver to
tighten or loosen the screw.
37810 Manual_Revised_13-0116
Fig. 5
Fig. 6
Fig. 7
Page 15