Instructions To Fix Together The Cooker, The Insulation Side Model And - Lacunza Vulcano 7T E3 E/E Instruction Book

5.-INSTRUCTIONS TO FIX TOGETHER THE COOKER, THE
INSULATION SIDE MODEL AND THE DRAWERS MODULE
Detail
:
2- Recommended minimum distance
to NON-combustible material >3 cm
-1 Place the cooker in position. The cast-iron top surface
must never stand out beyond the top surface next to it.
We recommend that the cooker should stand out 1 cm in
front of the top surface.
-2 Fit the cooker according to the safety distances to
combustible materials. Even though the wall is not
combustible, the cooker should be separated from the
wall by approx. 3 cm
-3 Fit the insulation module, adjusting the height and
leaving a small gap between the cooker and the
insulation module (distance>3 mm)
-4 Then fit the drawer module, following the instructions
to secure it to the floor. Rest the top surface on the
drawer module supports. (Distance >3 mm). VERY
IMPORTANT: THE TOP SURFACE MUST BE
NON-COMBUSTIBLE
3- Distance > 3mm
1
4- Distance >3mm
21