Using Your Fingerprint - Zte Blade Spark AT&T User Manual

Note: When this feature is enabled, your phone cannot
receive calls, messages, or notifications, including alarms,
until it starts up .
4 . For Pattern, PIN, or Password lock, select how you would like
notifications and their contents to show when the phone is
locked, and then tap DONE .
Note: Remember the pattern, PIN, or password you set .
Otherwise, you will need to upgrade the phone software to use
the phone .

Using Your Fingerprint

With the fingerprint sensor on the back of your phone, you can
register up to five fingerprints and use them to unlock the phone,
or simply press the fingerprint sensor to open a selected app,
take photos, or answer calls .
Note: The fingerprint feature is available only when a screen lock
(Pattern, PIN, or Password) is enabled . When the screen lock is
reset to None or Long press, all registered fingerprints are erased.
Registering a Fingerprint
1 . From the home screen, tap
Fingerprint .
2 . Enter the screen lock pattern, PIN, or password you set . If you
haven't set a screen lock, follow the prompts to set it .
3 . Tap REGISTER or Fingerprint Add fingerprint .
4. Follow the prompts to record the center and edges of a finger.
5 . Tap OK .
Note: Tap an existing fingerprint record to change its name or
delete it .
22
Settings Security
PERSONALIZING
Setting Fingerprint Actions
1 . From the home screen, tap
Fingerprint .
2 . Enter the screen lock pattern, PIN, or password you set .
3 . Tap the switches to adjust the following settings:
• Wake up and unlock your phone: When a screen lock
(Pattern, PIN, or Password) is enabled, you can wake up the
phone and unlock it with a registered fingerprint.
• Shortcut to a favorite app: When the screen is off or
locked, press the fingerprint sensor to open a selected app.
• Take photo: When the Camera app is open, press the
fingerprint sensor to take a photo. No fingerprint
verification is needed.
• Answer call: Press the fingerprint sensor to answer
incoming calls. No fingerprint verification is needed.
PERSONALIZING
Settings Security
23