Using Wi-Fi Direct; Connecting To Bluetooth Devices - Zte Blade Spark AT&T User Manual

4 . Press the WPS button on the wireless router, and the access
point will recognize your phone and add it to the network .
Method Two: PIN
1 . From the home screen, tap
2 . Slide the Wi-Fi switch to the On
3 . Tap Advanced WPS Pin Entry .
4 . The WPS PIN displays on the screen . Enter the PIN into the
access point's setup page .
After entering the PIN, your phone automatically finds the access
point and configures the connection.
Note: For detailed information about the WPS feature of the
access point, please refer to its documentation .
Adjusting Advanced Wi-Fi Settings
1 . From the home screen, tap
2 . Slide the Wi-Fi switch to the On
3 . Tap Advanced to adjust the following settings .
• Install certificates: Install certificates needed for
connecting to certain Wi-Fi networks .
• Wi-Fi Direct: Use the Wi-Fi Direct feature . See Connecting
to Networks and Devices – Using Wi-Fi Direct .
• WPS Push Button: Connect to a WPS network via the push
button method .
• WPS Pin Entry: Connect to a WPS network via the phone
PIN method .
• Connect to AT&T Wi-Fi spot: Slide the switch to enable or
disable automatic connection to an AT&T Wi-Fi spot when
one is available .
42 CONNECTING TO NETWORKS AND DEVICES
Settings Wi-Fi .
position .
Settings Wi-Fi .
position .

Using Wi-Fi Direct

Wi-Fi Direct allows Wi-Fi devices to connect to each other without
the need for wireless access points (hotspots) .
Note: Activating this feature will disconnect your current Wi-Fi
network connection .
1 . From the home screen, tap
2. If Wi-Fi is off, slide the Wi-Fi switch to the On
Advanced Wi-Fi Direct . Your phone will search for
3 . Tap
other devices enabled with Wi-Fi Direct connections .
4 . Tap a device name under Peer devices to connect with it . The
other device will receive a Wi-Fi Direct connection prompt and
need to accept the request for connection . Both devices may
need to enter a common PIN . If prompted, tap ACCEPT .
5 . Once connected, the device is displayed as "Connected . "

Connecting to Bluetooth Devices

Bluetooth is a short-range wireless communication technology .
Phones or other devices with Bluetooth capabilities can exchange
information wirelessly within a distance of about 30 feet . The
Bluetooth devices must be paired before the communication
is performed .
Turning Bluetooth On/Off
1 . From the home screen, tap
2 . Slide the Bluetooth switch to the On
When Bluetooth is on, the
Your phone will be visible to nearby devices while Bluetooth
Settings is open .
CONNECTING TO NETWORKS AND DEVICES
Settings Wi-Fi .
position .
Settings Bluetooth .
or Off position .
icon will appear in the status bar .
43