Usb Configuration - LG 43LX770M Commercial Mode Setup Manual

(Continued from previous page)
The EZ-Manager Wizard will proceed with the remaining Pro:Centric application and/or E-Z
Installation data download steps (see Processing the Pro:Centric Confi guration screen example
on page 18).
When the Pro:Centric confi guration is complete, an EZ-Manager Confi guration Complete screen
(see example on page 18) is displayed, and after 10 seconds, the wizard exits, and the TV turns
OFF.
Note: With the EZ-Manager Confi guration Complete screen on display, you can also manually turn
off or reboot the TV. If desired, select TURN OFF or REBOOT, respectively, and then press OK on
the Installer Remote.
USB Confi guration
TV Manager / USB download options enable you to download confi guration or software fi les
individually from a USB memory device to the TV. You can also use the Ez Download utility
available from the menu to select one of each type of fi le to be downloaded at one time using
one process.
Each of the USB download functions requires that you have the appropriate fi le(s) loaded on a USB
memory device. If you wish to perform a software update or download a splash screen image, the
software update/image fi le(s) must be stored in a folder named "LG_DTV" in the root directory of the
USB memory device. Clone/Confi guration (.tlx) fi les should simply be stored in the root directory of
the USB device.
The procedure below assumes the desired fi le(s) is/are already loaded onto the USB device. For
further information on the TV Manager / USB download options and fi le requirements, and/or for
information on creating Clone/Confi guration (.tlx) fi les, refer to the appropriate section(s) in this
document.
Before You Begin
• If you intend to use the Zoning feature(s) on this TV, make sure to assign the appropriate TV
Zone # and/or Wi-Fi Zone # in the EZ-Manager's Zones, Label, and Room Number screen
BEFORE continuing with USB Confi guration. See "TV Confi guration Options" on page 15 for
further information.
• Ensure the USB device to be used has been formatted with FAT format.
• When creating fi les to be downloaded, avoid using special characters (?, &, @, etc.) in fi lenames.
• Refer to "Ez Download Utility" on pages 32 to 35 for further information on the Ez Download utility.
• Refer to "Custom Master TV Setup" on pages 47 to 49 for information on creating a Clone (.tlx)
file, and/or refer to "Creating an FTG Confi guration File" on pages 57 to 58 for information on
creating an FTG Confi guration (.tlx) fi le for FTG Mode via CPU confi guration.
• See Reference section, "Downloading a Splash Screen Image using a USB Memory Device,"
for splash screen image guidelines.
• See Reference section, "Updating TV/PTC Software using a USB Memory Device," for further
information on software updates.
206-4292 Draft A.2
EZ-Manager Wizard (Cont.)
21