LG 43LX770M Commercial Mode Setup Manual page 55

(Continued from previous page)
8. If more than one USB memory device is currently connected to the TV, be sure to select the
USB device that contains the ".tlx" fi le you wish to use. If necessary, use the arrow keys on
the Installer Remote to select/highlight the USB DEVICE button in the top right corner of the
screen and press OK. Then, use the Up/Down arrow keys to select the appropriate USB
device from the pop-up list of USB devices displayed at the top of the screen.
9. Use the Up/Down arrow keys to select Import Clone File, and then press OK.
A list of the ".tlx" fi les stored in the root folder of the USB memory device will be displayed on
the screen.
TV MANAGER
USB 1: Device Name
Ez Download Select the fi le to download, and then select UPDATE below.
Logo Image Download
Update TV Software
Update PTC Software
Import Clone File
Diagnostics
10. Use the arrow keys on the Installer Remote to select/highlight the ".tlx" fi le to import, and then
press OK.
Note: Filenames of exported Clone fi les are comprised of the TV model and a numeric element,
for example, xxLX770M-UA_1.TLX.
11. If the Clone/Confi guration (.tlx) fi le includes an FTG Channel Map with RF channels and Aux
inputs only, you can choose the format for the channel tuning/banner display. Use the arrow
keys to select the desired Channel Tuning / Channel Banner Display option—either Logical
or Physical—at the right side of the screen. A checkmark will appear at the left of the selected
option. Logical tuning is selected by default.
Note: If an FTG Channel Map includes IP channels, only logical tuning is available. Also, if the
".tlx" fi le does not include an FTG Channel Map, the message, "No Channel Map in Clone fi le,"
will be displayed at the right of the screen.
206-4292 Draft A.2
xxLX770M-UA_1.TLX
LX770M_ChMap_IM.tlx
UPDATE
Cloning Procedures (Cont.)
USB Device
USB 1: Device 1
USB 2: Device 2
USB DEVICE EXIT
Channel Tuning / Channel Banner Display
Logical
Physical
(Continued on next page)
55