Operation
10. Turn prime valve horizontal. Trigger gun
into flushing pail to purge fluid from hose.
11. Engage trigger lock.
12. Turn pressure control knob to the lowest
pressure setting and turn ON/OFF
switch to OFF position. Disconnect
power to sprayer.
26
13. Remove filter from gun and sprayer if
20 s
14. If flushing with water, flush again with
ti24649a
15. Wipe sprayer, hose and gun with a rag
ti24717a
installed. Clean and inspect. Install filter.
See separate gun manual.
ti24718a
mineral spirits or Pump Armor to leave a
protective coating to prevent freezing or
corrosion.
ti24719a
soaked in water or mineral spirits.
ti25631a
334466F