How To Operate The Welder And Generator Set - Kipor KDE180XW Operator's Manual

3.6 How to Operate the Welder and Generator Set

3.6.1 Operating the Diesel Engine
(1) Preheat the diesel engine for three minutes under the condition without any
load.
(2) For the diesel engine having the low oil pressure alarm system, it is necessary
to check whether the oil pressure signal indicator lights up.
For the diesel engine having the low oil pressure alarm system, the lubrication oil
alarm indicator will light up when the oil pressure is low or the lubrication is
insufficient, and the diesel engine will stop automatically. If no lubrication oil is
added and you do not make a restart, the diesel engine will still stop immediately.
It is necessary to check the oil height and add some oil.
(3)Do not unfasten the adjustment bolt used for adjusting the speed limit of the
diesel engine or do not unfasten the high-pressure pump limit bolt (they were
adjusted well when delivered from the factory.). Otherwise their performance will
be affected.
Adjustment Bolt
3.6.2 Inspection during the Operation
(1) Check whether there is any abnormal sound or vibration.
(2) Check whether the diesel engine does not start or the operation is not good.
(3) Check the exhausted gas color (is it black or is it too while?)
If you find one of the above mentioned phenomena, it is necessary to brake the
set, to find out the trouble cause and shoot the trouble. If the settlement can not
be made, please contact agency of our company nearby, or contact our company
directly.
-18- -19-