Faceplate / Bezel Installation - AEM 30-0300 Instruction Manual

Faceplate / Bezel Installation

The gauge kit is supplied assembled with a black faceplate and black bezel. An accessory kit is available (for purchase
through AEM dealers) which includes an optional silver bezel and white faceplate.
Accessories section earlier in the document for the appropriate part numbers.
www.aemelectronics.com for more information.
The faceplate may be reversible, displaying alternative scalings on either side. Reference the Operation section of this
manual for details on how to switch the display mode when reversing the faceplate. Disassembly is required to change
the faceplate, flip/reverse the faceplate, or change the bezel of the gauge. The following diagram will provide familiarization
with the major components of the gauge prior to beginning the procedure.
7/12/2017 - DOCUMENT NUMBER: 10-0300
30-0300 X-Series UEGO Gauge
Item Qty
1 1
2 1
3 1
4 1
5 1
6 2
7 2
8 3
9 1
10 2
11 1
Description
Lens
Bezel
Faceplate
Diffuser
Light Guide
Button
Mounting Stud (M4 x 0.7)
Assembly Screw
Mounting Bracket
Brass Thumb Screw (M4 x 0.7)
Printed Circuit Board (PCB)
Please reference the Optional
Contact your dealer or visit
© 2017 AEM Performance Electronics
5