Disassembly And Assembly Instructions - Samsung GT-i8910 Service Manual

11. Disassembly and Assembly Instructions

11-1. Disassembly Instructions
1
Remove the Rear cover
- Use a decomposition tool to
gap between Rear cover and Rear.
- Using a decomposition tool, locker is disintegrated
easily.
3
Separate the Rear
-
Separate upper part corner using a
decomposition tool.
Rear cover part and make
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
2
SCREW 6
POINTS
Remove Screws
- Remove 6 Screws.
4
Separate the Rear
- Separate all corners using a decomposition tool.
-
Lift the rear from the front with care.
11-1