11. Disassembly and Assembly Instructions
11-1. Disassembly
1
RELEASE SCREWS AT 4 POINT.
1) Be careful not to make scratch and molding damage!
3
DISASSEMBLE MAIN PBA.
1) Be careful not to make scratch and molding damage!
2) When you disassemble connector, take care not to tear
FPCB.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
2
DISASSEMBLE REAR.
1) Be careful not to make scratch and molding damage!
DISASSEMBLE MAIN PBA.
4
1) Be careful not to make scratch and molding damage!
11-1