Samsung GT-i8910 Service Manual page 132

5
Place the KEY PAD.
-
Keep in mind to guide hole and assemble key
pad.
7
Tighten screws at 2 points.
9
Assemble the UPPER SPK MODULE.(2)
-
Assemble RECEIVER connector .
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Disassembly and Assembly Instructions
6
Assemble the Lower SPK Module to Front
ass'y.
-
Insert lower speaker module so that locker is
assembled.
8
Assemble the UPPER SPK MODULE.(1)
-Insert in PBA to lower direction carefully over as
EARJACK is not damaged upper speaker module.
10
Assemble the UPPER SPK MODULE.(3)
- Assemble the CIF CAM+SENSOR MODULE to
the PBA connector with great care..
11-6