Samsung GT-i8910 Service Manual page 131

Disassembly and Assembly Instructions
11-2. Disassembly Assembly
1
Ready
3
Assemble the TSP from Front ass'y(1).
- Insert the TSP FPCB to passing hole.
※ Take care as IC on connector is not damaged
by hole.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
2
Insert the OLED to Front ass'y
-
Place stiffener of OLED passing hole carefully
after removing double-sided tape a release paper
of OLED bracket.
4
Assemble the TSP from Front ass'y(2).
- Lock lever after inserting TSP FPCB in ZIP
connector.
11-5