Samsung GT-i8910 Service Manual page 128

Disassembly and Assembly Instructions
5
SCREW 2
POINTS
Remove Screws
- Remove 2 Screws.
7
Separate the PBA from FRONT Ass'y.
-
Separate the PBA from the FRONT Ass'y with
care.
9
Separate the 8M CAM & SPEAKER
connector.
-
Separate 8M CAM & SPEAKER connector from
the PBA connector with great care. (Be careful not
to cut wire.)
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
6
Separate the KEY & SPK connector .
-
Separate KEY & SPK Connector from the PBA
Connector with care.
8
Separate the MOTOR from PBA.
-
Separate motor carefully so that motor wire does
not cut from PBA.
10
Separate the FLASH FPCB connector.
-
Separate FLASH FPCB connector from the PBA
connector with great care. (Be careful not to tear
FPCB.)
11-2