Samsung GT-i8910 Service Manual page 133

Disassembly and Assembly Instructions
11
Assemble the UPPER SPK MODULE.(4)
-
Assemble FLASH LED+MIC MODULE connector.
13
Insert the MOTOR.
-
Place motor wire to (Be careful of is expired)
bracket twisting round.
15
Assemble the KEY & SPK connector .
-
Assemble KEY & SPK Connectors to the PBA
Connector with care.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
12
Assemble the 8M CAMERA.
-
Assemble 8M CAMERA connector after
assembling twisting upper speaker module wire
rounds.
14
Assemble the PBA to FRONT Ass'y.
-
Place PBA carefully on hook.
16
SCREW 2
Tighten screws at 2 points.
11-7
POINTS
two