Samsung GT-i8910 Service Manual page 10

Array course control
4-2-3. USB Driver installation
Execute SSDN_V1.1.808.7165_SETUP_whql.exe to setup PDA Driver
Unzip SAMSUNG Mobile USB DRIVER(4.40.7.0) v1.6.zip, setup Mdem Driver with setup.
exe
4-2-4 How to Downlaod
!!! Make sue CODE, CSC, MODEM(BASEBAND) mapping in 'Release Note', and then
download with the correct version. After download, press *#1234#and check CODE, CSC
and MODEM version. This is very important. !!!
i. CODE + CSC + MODEM(BASEBAND) Download(Full Release)
1. In myProject, download CODE, CSC and MODEM(BaseBand) binary.
2. Launch 'Symbian Rom Flashing Tool', press
MODEM(BASEBAND) binary.
3. Press
4. Press
5. Confirm CODE and CUSTOM version
6. Power on the phone with Hold + Side Volume Up Key pressed
(PDA DOWNLOAD mode)
7. When you connect phone to PC with USB, PDA is attached
8. Select the type of binary which you want to download in Multi-ROFS Option box.
9. Set the download option like this.
10. Press
This Document can not be used without Samsung's authorization
button to select CODE xml. (ex: CODE_I8910XXIB5.xml )
button to select CSC xml. (ex: CSC_I8910AUTIB5.xml )
button to start download.
SAMSUNG Proprietary-Contents may change without notice
4-4
button to select