11
Separate the CIF CAM connector with
sensors from PBA.
-
Separate CIF CAM connector from the PBA
connector with great care. (Be careful not to
damage SENSORS.)
13
Separate the Speaker Module from PBA.
-
Separate speaker module from the PBA
connector with great care. (Pull to arrow direction
and take out as parts does not get damage.)
15
Separate the Lower SPK Module from
Front ass'y.
- Pull mold to left/right interactive and press key pad
of opposite with hand and saparate lower speaker
module
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Disassembly and Assembly Instructions
12
Separate the RECEIVER connector.
-
Separate RECEIVER connector from the PBA
connector with great care. (Be careful not to cut
wire.)
14
Remove Screws
- Remove 2 Screws.
16
Separate the Keypad.
-
Separate the Keypad.
11-3
SCREW 2
POINTS