MA lighting dot2 XL-F Quick Manual page 61

Cleaning
Devices of the dot2 family only requires minor attention. Disconnect electric power supply prior to
cleaning. Clean the surface only with dry soft cloth. Do not use any liquid cleaner or compressed air.
Do not use any solvent. Only the elastic wrist rest may be cleaned with a mild detergent and a damp
cloth. Check ventilation holes are clear.
Depending on the environment we recommend to clean the device professionally every 2 – 5 years.
Maintenance
The unit requires no regular maintenance, so it is not necessary to open the device.
NOTE: Before any repair, disconnect the device from the mains. The unit should be serviced by
qualified personnel only, as live parts may be exposed when opening and/or removing coverings;
besides others, you run the risk of suffering an electric shock.
dot2
Data
Transport
Safety
Instructions
Limitation
Quickstart
Connect
Quickstart
ON / OFF
Maintenance
Conformity
60