MA lighting dot2 XL-F Quick Manual page 54

Quick Connect dot2 XL-F and dot 2 XL-B (rear side)
1 2 3 4 5 6
1 Mains switch ON / OFF(0) and connector (C14) 230 V ~ 50Hz /
Automatic operation, no switching necessary!
Use a cable with an inlet socket (C13) and a safety plug according to the standard of installation
location
2 RJ45 Ethernet Connection for e.g.dot2 F- wing or dot2 B- wing (do not use CrossOver-cable)
3 3x USB Connection for extern Keyboard, Mouse, storage device ...
4 DVI –D Connection for an external monitor
5 AUDIO IN (min 20mV)
6 DMX – IN (XLR 5 pin)
7 Midi –Out / Midi –In
8 Connector only for Analog Remote Control
NOTE: This connector is not used for other external devices!
9 LAMP Connection for a desk lamp (max 0,2A)
10 LTC – Timecode – IN (XLR 3 pin)
11 4x DMX OUT (XLR 5 pin)
7 8 9 10 11
120V ~ 60Hz (USA, Canada)
dot2
Data
Transport
Safety
Instructions
Limitation
Quickstart
Connect
Quickstart
ON / OFF
Maintenance
Conformity
53