MA lighting dot2 XL-F Quick Manual page 53

Connect „Software"
NOTE: all units of the dot2 family use the IPv6 system - ie, it must not create a separate IP address
for each device on a network. If a PC / laptop or a switch is connected over a network to a MA dot2
device, it must also IPv6 - use system.
dot2 Konsole and PC / Laptop with dot2 onPC
E.g. for transmitting a show that was programmed in onPC to the console.
dot2 Konsole and PC / Laptop with dot2 3D
E.g. to visualize a show that has been programmed on the console.
NOTE: With programmable switches the IPv6 feature is often disabled in the default state. This
function must be activated.
(over Ethernet / Switch)
+ PC (with IPv6) +
+ PC (with IPv6) +
dot2
Data
Transport
Safety
Instructions
Limitation
Quickstart
Connect
Quickstart
ON / OFF
Maintenance
Conformity
52