MA lighting dot2 XL-F Quick Manual page 40

Data
Current:
Required plug connector:
(at the rear panel)
Required plug connector:
(Power supply)
Power input:
Required connector type (Ethernet): Suitable for socket RJ 45
Required cable type (Ethernet):
Required connector type (DMX)
Required cable type (DMX) :
Screen(s):
The screens of MA dot2 series are subject to pixel fault class II (ISO 9241-307).
Following conditions are considered acceptable and within limits:
ITEMS:
Permanent bright dots max 2 (minimum distance between bright dots ≥ 15mm)
2 dots adjacent permanent bright
Permanent dark dots
2 dots adjacent permanent dark
Total bright and dark dots
Some slight scratches on the surface of the screens due to technical reasons.
230 V ~ 50Hz / 120V ~
Automatic operation, no switching necessary!
IEC connector C13
Power cable: Only adequately protected cables may be used
(min. Ø = 3 x 1,0mm²). Cable and socket are not included in
delivery.
Must meet the standard in the respective country.
The socket should be serviced by qualified personnel only!
dot2 XL-F max. 100 VA
dot2 XL-B max. 100 VA
dot2 core max. 100 VA
dot2 F- wing max. 40 VA
dot2 B- wing max. 40 VA
Ethernet cable Category CAT-5e or higher
Recommended lenght: max 75m
Pol XLR Type USITT DMX-512/1990
5-
DMX 5 Pol cable
Recommended lenght: up to 350 m (under ideal conditions)
7" Touchscreen with a resolution: 800 x 480 pixel
ACCEPTABLE COUNTS (
max 1
max 5 (minimum distance between dark dots ≥ 15mm)
max 1
max 5
60Hz (USA, Canada)
):
per 1 000 000 pixels
dot2
Data
Transport
Safety
Instructions
Limitation
Quickstart
Connect
Quickstart
ON / OFF
Maintenance
Conformity
39