MA lighting dot2 XL-F Quick Manual page 56

Quick Connect dot2 F-wing and dot2 B-wing (rear side)
1 Mains switch ON (I) / OFF (O)
2 Connector (C14) 120 V ~ , 60 Hz (USA, Canada) – 230 V ~ ,50 Hz – The power
supply automatically switches. Use a cable with an inlet socket (C13) and a safety plug
according to the standard of installation location.
3 Ethernet connector RJ 45 10/100 Base T/X
For connecting this wing with dot2 console (do not use Crossover-cable).
dot2
Data
Transport
Safety
Instructions
Limitation
Quickstart
Connect
Quickstart
ON / OFF
Maintenance
Conformity
55