Closing The Door; Installation - Zanussi ZBB27453SK User Manual

2. Replace the lamp with one of the same power
and shape, specifically designed for household
appliances. The maximum power is shown on
the light bulb cover.

INSTALLATION

WARNING! Refer to Safety chapters.
POSITIONING
This appliance can be installed in a dry, well
ventilated indoor where the ambient temperature
corresponds to the climate class indicated on the
rating plate of the appliance:
Climate
Ambient temperature
class
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
Some functional problems might occur
for some types of models when
operating outside of that range. The
correct operation can only be
guaranteed within the specified
temperature range. If you have any
doubts regarding where to install the
appliance, please turn to the vendor,
to our customer service or to the
nearest Authorised Service Centre.
ELECTRICAL CONNECTION
CAUTION! Any electrical work
required to install this appliance
should be carried out by a qualified
electrician or competent person.
10
3. Reassemble the lamp cover.
4. Connect the plug to the mains socket.
1
5. Open the door.

CLOSING THE DOOR

2
1. Clean the door gaskets.
1
2. If necessary, adjust the door. Refer to
3. If necessary, replace the defective door
The wires in the mains lead are coloured in
accordance with the following code:
•
•
•
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows:
1. Connect the wire coloured green and yellow to
Make sure that the light comes on.
"Installation".
gaskets. Contact the Authorised Service
Centre.
WARNING! This appliance must be
earthed.
The manufacturer declines any liability
should these safety measures not be
observed.
A
A - green and yellow: Earth
C - brown: Live
D - blue: Neutral
the terminal marked either with the letter "E" or
B
C
D
E