Technical Information; Technical Data - Zanussi ZBB27453SK User Manual

Ha Hb
Hc Hd
17. Install the part (Ha) on the inner side of the
kitchen furniture.
~50 mm
o
90
21 mm
o
90
~50 mm
21 mm
18. Push the part (Hc) on the part (Ha).
Ha
Hc
19. Open the appliance door and the kitchen
furniture door at an angle of 90°.
20. Insert the small square (Hb) into guide (Ha).
21. Put together the appliance door and the
furniture door and mark the holes.
8 mm
Hb
Ha

TECHNICAL INFORMATION

TECHNICAL DATA

Dimensions of the recess
22. Remove the brackets and mark a distance of 8
mm from the outer edge of the door where the
nail must be fitted (K).
8 mm
K
Ha
23. Place the small square on the guide again and
fix it with the screws supplied.
24. Align the kitchen furniture door and the
appliance door by adjusting the part (Hb).
Hb
25. Press the part (Hd) on the part (Hb).
Hb
Hd
Do a final check to make sure that:
• All screws are tightened.
• The sealing strip is attached tightly to the
cabinet.
• The door opens and closes correctly.
13