Table of Contents
Advertisement
x
x
2. Install the appliance in the niche.
3. Push the appliance in the direction of the
arrows (1) until the upper gap cover stops
against the kitchen furniture.
2
1
4. Push the appliance in the direction of the
arrows (2) against the cupboard on the
opposite side of the hinge.
5. Adjust the appliance in the niche.
Make sure that the distance between the
appliance and the cupboard front-edge is 44
mm.
The lower hinge cover (in the accessories bag)
makes sure that the distance between the
appliance and the kitchen furniture is correct.
Make sure that the clearance between the
appliance and the cupboard is 4 mm.
6. Open the door. Put the lower hinge cover in
position.
4mm
44mm
7. Attach the appliance to the niche with 4
screws.
12
I
I
8. Remove the correct part from the hinge cover
(E). Make sure to remove the part DX, in the
case of right hinge, SX in opposite case.
9. Attach the covers (C, D) to the lugs and the
hinge holes.
C
D
E
E
B
10. Install the vent grille (B).
11. Attach the hinge covers (E) to the hinge.
12. Connect the appliance laterally to the kitchen
furniture sidewall.
13. Loosen the screws of the part (G) and move
the part (G) till the furniture sidewall.
G H
14. Tighten the screws.
15. Attach the part (H) to the part (G).
16. Disconnect the parts (Ha), (Hb), (Hc) and (Hd).
Advertisement
Table of Contents
