IDEAL AW 60 Operating Instructions Manual page 57

HEPA + Carbon Combination Filter Replacement
1. Pull the tab on the back and remove the
Pre-Filter and Rear Air Intake Grille.
Rear Air Intake Grille and Pre-Filter are
combined.
Slide the Combination Filter out.
2.
Remove vinyl packaging of Combination
3.
Filter.
If Combination Filter is installed without removing
the vinyl packaging, the unit may not turn on.
If the unit is operated without removing the vinyl
packaging, it may cause abnormal noises or
product malfunction due to motor overheating.
Slide the HEPA + Carbon Combination
4.
Filter back into its original position.
Carbon Filter is replaced, and then HEPA Filter
is replaced.
5. Place Pre-Filter and Rear Air Intake
Grille cover back into original position.
Combination
Filter
- 57 -