Setups - Radial Engineering HEADLIGHT Manual

SETUPS

Headlight with 4 amps on stage
This is the guitar aficionado's ultimate
setup. Output-1 is connected to a Fend-
er Twin™ for a clean tone, output-2 to
®
an AC30™ for a stereo effect, output-3
to a Marshall for crunchy rhythm and
®
output-4 is connected to a small 20-watt
amp for soloing at volume 10. Connect
a tuner to the dedicated output and use
the mute footswitch to turn the amps off
when needed.
Headlight as an ABY
Connect two amps from the Headlight
using outputs 1 and 2. Set the mute
function switch to the downward posi-
tion so that when the mute footswitch is
depressed, both amps will play at once.
You can then add effects pedals before
or after the Headlight to create various
setups. Select between the two amps
using the select footswitch or have both
amps play at once using the mute foot-
switch.
Radial Engineering Ltd.
Made in Canada
Made in Canada
10
9VDC
9VDC OUT 3-4 OUT 1-2 IN / TUNER
HEADLIGHT
TM
MUTE LIFT LIFT LIFT DRAG
ALL ON GND POL GND POL GND POL MIN MAX
MUTE OUT 4 OUT 3 OUT 2 OUT 1
MUTE SELECT
9VDC
9VDC OUT 3-4 OUT 1-2 IN / TUNER
HEADLIGHT
TM
DRAG
MUTE LIFT LIFT LIFT
ALL ON GND POL GND POL GND POL MIN MAX
MUTE OUT 4 OUT 3 OUT 2 OUT 1
MUTE SELECT
Headlight™ User Guide