Table of Contents
Advertisement
6050H
User's Guide
Environmental Conditions
Although the instrument has been designed for optimum durability and trouble-
free operation, it must be handled with care. The instrument should not be
operated in an excessively dusty or dirty environment. Maintenance and cleaning
recommendations can be found in the Maintenance Section of this manual.
The instrument operates safely under the following conditions:
•
•
•
•
•
•
Quick Start
READ the Bath Use section before placing the bath in service.
Incorrect handling can damage the bath and void the warranty.
This section gives a brief summary of the steps required to set up and operate
the 6050H bath. This should be used as a general overview and reference and
not as a substitute for the remainder of the
through General Operation carefully before operating the bath.
Unpacking
Unpack the bath carefully and inspect it for any damage that may have occurred
during shipment. If there is shipping damage, notify the carrier immediately.
Verify that all components are present:
•
•
•
•
•
If you are missing any item, please contact Fluke Calibration.
10
ambient temperature range: 5 50 °C (41 122 °F)
ambient relative humidity: maximum 80% for temperature <31 °C, decreasing
linearly to 50 % at 40 °C
mains voltage within ±10 % of nominal
vibrations in the calibration environment should be minimized
altitude less than 2,000 meters
indoor use only
Bath
Access Hole Cover
Controller Probe
Manual
Report of Test
WCaution
manual. Please read Installation
Advertisement
Table of Contents
