Removing And Installing Flywheel, Replacing Gear Ring - Man D 2866 LE 401 Repair Manual

Removing flywheel
Fig. 1
Loosen mounting bolts (24 mm), securing the en-
gine against turning if necessary.
Note:
Owing to the high initial torque a reinforced
socket (for machine screws) in connection
with a 1/2" tool is required.
Fig. 2
Remove two bolts facing each other and replace
them by two guide pins (special tool, see
page 127, item. 16).
Remove all bolts.
Fig. 3
Pull off flywheel using a flat metal bar and two
bolts M12 x 1.5. Do not tilt it so that it jams.
Caution:
The flywheel is heavy.
Use lifting gear.
Installing flywheel
Fig. 4
Screw in guide mandrels
(special tool, see page 127, item 16).
Apply sealing agent "Antipor 46" to the inside of
the flywheel.
Place guide mandrels on the flywheel, ensuring
that the centering mandrel (arrow) fits correctly into
the bore in the flywheel. Push on flywheel until it
stops.
Removing and installing flywheel,
replacing gear ring
1
2
3
4
62
3466
3675
3468
3676