Du Pont WFQT13000 Series Installation Instruction Manual page 10

Optional Installment Method: Direct connect to Kitchen Faucet
NOTE: Undersink filters reduce water flow. If you wish to maintain unfiltered water flow for dishwashing, etc., we recommend
installing separate Faucet for Filtered Water (DuPont WFFT100 Series).
STEP 1
-Optional Direct Connect
Turn Off the Main Water Supply Line
1
Locate the cold water shut-off valve under the sink. Turn off the cold water supply to the existing kitchen sink.
NOTE: If uncertain about which line supplies the cold water, turn on the hot water to the faucet. llow the water to heat up and carefully
feel the pipes under the sink. The pipe that remains cool to the touch is the cold water supply.
2
Turn on the cold water faucet on the kitchen sink to release pressure and allow water to completely drain from the line.
STEP 2
-Optional Direct Connect
Mount the System Head
1
Choose an easy-to-access area under the sink to mount the Filter System.
NOTE: To allow adequate space for filter changes, allow a minimum clearance of 4-6" below the QuickTwist
must be mounted in a vertical position.
NOTE: Mount the Filter System to a solid cabinet wall or wall. If a solid surface is not available, use hollow-wall anchor bolts or toggle
bolts (not included) to secure to the wall.
2
Remove the cap from the top of the System Head
provided on the back of this booklet, mark the holes for the Mounting Screws
3
Using a 1/8" drill bit, drill two pilot holes for the Mounting Screws. Insert Mounting Screws into the wall with a Phillips screwdriver,
leaving approximately 3/8" of each Mounting Screw exposed.
4
Hang the System Head on the eyes of the bracket and replace the System Head cap.
Be sure that all electrical appliances and outlets are turned off at the
circuit breaker before working in cabinet area.
WFQT13000 & WFQT13500 Series
. Using the Built-in Bracket on the back of the System Head or the template
C
on the wall surface.
W RNING
™ Filter. The Filter System
C UTION
Please wear safety glasses to protect
eyes when drilling.
10
1
KITCHEN F UCET
KITCHEN F UCET
COLD W TER HOT W TER
HOT W TER
V LVE V LVE
V LVE
RIGID TUBING INST LL TION
2
INLET
4-6"
COLD W TER
V LVE
COLD W TER
V LVE
FLEXIBLE TUBING INST LL TION
2
OUTLET
3
V4.0