Zte ZXWL W822E User Manual page 6

ZXWL W822E Wireless Access Point User Manual
Figure 1 External View
LED Indicators
The ZXWL W822E LED indicators are located on the top of the AP. For a description of
the LED indicators, refer to
Table 1 LED Indicators
Indicator
RUN
2.4 G
5 G
ETH1
ETH2
1. Flashing slowly: ON for 500 ms and OFF for 500 ms
2. Flashing quickly: ON for 100 ms and OFF for 100 ms
3. Flashing: ON for 900 ms and OFF for 100 ms
SJ-20130807102306-001
Table 1.
Status Description
Flashing slowly The device is powered on and not registered to the AC.
Flashing fast The device is being started or the software is being updated.
ON The AP is registered to the AC.
ON The 2.4 G frequency WLAN function is enabled.
Flashing Data is being transmitted.
OFF The 2.4 G frequency WLAN function is disabled or faulty.
ON The 5 G frequency WLAN function is enabled.
Flashing Data is being transmitted.
OFF The 5 G frequency WLAN function is disabled or faulty.
ON Ethernet port 1 is connected properly.
Flashing Data is being transmitted through Ethernet port 1.
OFF Ethernet port 1 is not used for fails to operate properly.
ON Ethernet port 2 is connected properly.
Flashing Data is being transmitted through Ethernet port 2.
OFF Ethernet port 2 is not used for fails to operate properly.
2-2
ZTE Proprietary and Confidential