Zte ZXWL W822E User Manual page 22

ZXWL W822E Wireless Access Point User Manual
Figure 26 WAN Connection Page
The fat AP mode includes route mode and bridge mode. Select the correct mode
based on the networking solution.
b. Set WAN Type as required.
l
l
l
4. Set the LAN port.
a. Select Network> LAN> Address Management. The Address Management
page is displayed, see
SJ-20130807102306-001
Note： ： ：
If WAN Type is set to DHCP, the connected STA device obtains the IP address
dynamically.
If WAN Type is set to static, enter the IP address, mask default gateway, and
the DNS address.
If WAN Type is set to PPPOE, enter the corresponding username and
password.
Figure
6-4
27.
ZTE Proprietary and Confidential