Zte ZXWL W822E User Manual page 23

Figure 27 Address Management Page
b. Set the parameters. For a description of the parameters, refer
Table 4 Address Management Parameters
Parameter
LAN IP Address
Subnet Mask
DHCP Service
DHCP Start IP Address
DHCP End IP Address
DNS1
Default Gateway
5. Set WLAN.
a. Select Network> WLAN> Basic. The Basic page is displayed.
b. Set the required parameters. For a description of the parameters, refer to
SJ-20130807102306-001
Chapter 6 Fat AP Commissioning Instruction
Description
The IP address of the AP on the LAN side.
The subnet mask of the AP on the LAN side.
Set this parameter to DHCP Server.
The start IP address allocated to a terminal.
The end IP address allocated to a terminal.
DNS address.
AP address.
6-5
toTable
ZTE Proprietary and Confidential
4.
Table 5.