Zte ZXWL W822E User Manual page 24

ZXWL W822E Wireless Access Point User Manual
Table 5 Basic Parameters
6. Set SSID.
a. Select Network> WLAN> SSID setting. The SSID Settings page is displayed,
see
SJ-20130807102306-001
Parameter Description
Select network card 1 for the 2.4 G mode, and network card 2 for
Network Card
the 5 G mode.
l
l
Mode
l
Select a channel based on the management environment and the
Channel (2.4 G) anti-interference requirements. Channels 1 to 13 are available.
Default: auto.
Channels 149, 153, 157, 161, and 165 are available. When multiple
Channel (5 G) APs are configured, the APs must be configured with different
channels to avoid interference.
If this check box is selected, only channels 1, 6, and 11 are available.
Only Select 1/6/11 These channels have a strong orthogonal frequency-division
anti-interference feature.
Figure 28.
Both the 2.4 G and 5 G modes support multiple IEEE 802.11
operation modes.
For the 2.4 G mode, it is recommended to set the parameter to
Mixed (802.11b + 802.11g + 802.11n).
For the 5 G mode, it is recommended to set the parameter to
Mixed (802.11a + 802.11n).
6-6
ZTE Proprietary and Confidential