GROUP CYCLE: Service & Maintenance manual rev. 6.4
7.4 SADDLE PLAY ADJUSTMENT
Figure 7.4-1
Figure 7.4-2
Figure 7.4-3
1. Check the tightening of the screws.
2. Check the play of clamping devices (a) and
(b).
3. Check the state of wear of the plastic guides
(c) and (d) placed under the saddle and
replace them if necessary.
4. Check the state of wear of the saddle stem
bushing (e) and possible play on it.
5. Check the state of wear of the saddle stem
sleeve rack.
Page 7.7