Atop SE5001 Quick Start Manual

Atop SE5001 Quick Start Manual

Ethernet serial server
Hide thumbs Also See for SE5001:

Advertisement

SE5001 Ethernet Serial Server

Quick Start Guide

Version 1.5
September 2011
Tel: 886-3-5508137
Fax: 886-3-5508131
http://www.atop.com.tw

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SE5001 and is the answer not in the manual?

Questions and answers

Summary of Contents for Atop SE5001

  • Page 1: Quick Start Guide

    SE5001 Ethernet Serial Server Quick Start Guide Version 1.5 September 2011 Tel: 886-3-5508137 Fax: 886-3-5508131 http://www.atop.com.tw...
  • Page 2 Quick Start Guide  Product CD  Wall mounting screws  3 pin terminal block for power input  5-pin terminal block with lock*1 (SE5001-S5is or SE5001-S5-TB only) Optional Accessories Name Part Number Description DK-25 30200000000022G DIN-Rail Kit DC jack (1.35/3.5/7.5 mm) power adaptor,...
  • Page 3: Software Setup

    AP firmware is running normally Installation Procedures: Step 1: Step 1: Connect SE5001 to a power source using its 5V DC Jack or its 9-30V DC Terminal Block. Note that the DC Jack is 5V only and should be used with a power adaptor.
  • Page 4: Pin Assignments

    C. Using Web Browser Make sure the PC is on the same network subnet as SE5001. Open a web browser. Type in the IP address of SE5001 to be configured. Default user name is admin and default password is null (leave it blank).

This manual is also suitable for:

Se5001 seriesSe5001-s2Se5001-s5Se5001-s5is

Table of Contents