Related Manuals for Atop SE59 Series
Summary of Contents for Atop SE59 Series
- Page 1 Atop Technologies, Inc SE59XX Series Industrial Device Server Series Getting Started Guide...
-
Page 2: Table Of Contents
Content Table Document Information ........................3 Overview ............................3 Hardware Description ........................4 DataSheet for SE59XX Series........................4 Standard Kit Contents ........................... 4 User Provided items ............................. 4 Set up your Development Environment ....................5 Cross-compile .............................. 5 Demonstration ............................. 5 Hardware setup .......................... -
Page 3: Document Information
Document Information Revision History Version Date Description of change Author 2021.07.30 First edition Aswin 2021.09.30 Adding introduction to SE59XX series Dutch 2021.10.19 Correct the information for AWS Policies Dutch Overview The SE59XX is an industrial Ethernet serial device server which acts as a gateway for communications between Ethernet (TCP/UDP) port and RS-232/RS-422/RS-485 port. -
Page 4: Hardware Description
Power supply input voltage for device is between 9 – 48 VDC. The precise range for each device from SE59XX series could be checked on the ATOP online spec. The suggested power adaptor is 1.25A at 12 VDC output ,100~240VAC input which can buy from Atop`s accessories online. -
Page 5: Set Up Your Development Environment
Once user wants to build an application for the device or obtain the SDK source package from ATOP. User will also need the cross compiler in the toolchain because it contains a set of programming tools used to develop your applications and scripts for corresponding hardware platform. The toolchain will need about 300 MB of hard disk space on your PC. - Page 6 1. Open the terminal in your local computer and type the following command, you can use arm-linux- gnueeabihf-gcc cross compiler from the provided toolchain to build the application 2. Checking your directory, you can find out there is a new application called demo which is produced by the previous command.
-
Page 7: Hardware Setup
The default ip address for device is 10.0.50.100. For different series of SE59XX, there would be slight differences in each device`s default ip address setting. Default ip table for SE59XX series To change the default setting of password or the ip address, user can find steps by steps guidance in ATOP online user manual. -
Page 8: Led Indicators
LED Indicators The figure below depicts the meaning for LED Indicators for device SE59XX. LED Indicators for Device SE59XX For further information, please refer to ATOP Hardware Installation Guide and SE59XX User Manual https://www.atoponline.com/wp-content/uploads/2017/11/SEMBPG-5901B-2017.06.09.pdf https://www.atoponline.com/wp-content/uploads/2017/11/SE59XX_User-Manual- v1.8_20210317.pdf#page=102&zoom=100,62,133... -
Page 9: Setup Your Aws Account And Permissions
Setup your AWS account and Permissions Refer to the instructions at Set up your AWS Account. Follow the steps outlined in these sections to create your account and a user and get started: 1.Sign up for an AWS account 2.Create a user and grant permissions. 3.Open the AWS IoT console Pay special attention to the Notes. -
Page 10: Create A Thing Object
Give any name to the policy and specify action as iot:*, so that it permits all iot actions. – The examples in this document are intended only for dev environments. All devices in your fleet NOTE must have credentials with privileges that authorize only intended actions on specific resources. The specific permission policies can vary for your use case. -
Page 11: Build The Demo
Build the demo In this section, we use mqtt_demo_mutual_auth application in AWS IoT Device SDK for Embedded C as demonstration. This demo illustrates the process of device SE59xx subscribe and publish to MQTT topics to the AWS IoT Core message broker. - Page 12 After downloading all the needed certificates, user can use ATOP web page to upload certificates and cross- compiled application as instructed to device SE59XX. Once user pressing the start button, device will run the application which is uploaded by the user automatically.
- Page 13 Open the AWS IoT console in local computer, we can see that the device SE59XX has not only connected to the AWS MQTT broker but also sent the message successfully!
-
Page 14: Debugging
Using the telnet or ssh to log in device SE59XX, checking whether the device working properly. If not, user can inform this issue to ATOP. Troubleshooting Still facing difficulties or obstacles with your device? Inform ATOP online expert to solve problem for you https://www.atoponline.com/contact-us/...
Need help?
Do you have a question about the SE59 Series and is the answer not in the manual?
Questions and answers