Sony DSR-2000 Service Manual page 132

3-5. Removal/Reattachment of the Boards
Removal/Reattachment of the CP-342 board
(1) Remove the top panel. (Refer to Section 3-3.)
(2) Remove the seven connectors (blue, yellow, orange,
green, red, black, and white) on the rear panel with
tweezers.
(3) Remove the five screws (BVTT3 x 6) and remove the
rear panel in the arrow direction
Red
Screws
BVTT3 x 6
Connector
panel
Screws
BVTT3 x 6
3-16
White
Black
Green
Orange
Yellow
Blue
Connectors
(MB-859 board)
(4) Remove the eight screws while supporting the CP-342
board from the rear side, and remove the
CP-342 board.
(5) Fix temporally the CP-342 board to the rear panel with
the eight screws (B3 x 6).
(6) Tighten the eight screws (B3 x 6) securely and
reconnect the seven connectors disconnected in Step 2
with tweezers, using care to set the right color in the
right place.
(7) Reattach the rear panel to the unit by connecting
securely the five connectors of the CP-341 board
(CN601, CN602, CN603, CN604, and CN605) and the
three connectors of the CP-342 board (CN606, CN607,
and CN608) to the eight connectors of the MB-859
board.
(8) Fix the rear panel with the unit using the five screws.
Rear panel
CN605
CN604
CN603
CN602
CN601
CP-341 board
CP-342 board
CN606
CN607
Screws
CN608
B3 x 6
DSR-2000/2000P