Sony DSR-2000 Service Manual page 229

7. Reattaching the MD cover
(1) Insert the MD cover into the unit through the
big square hole of the right side panel of the
chassis.
(2) Fit the two claws in the lower side of the MD
cover in the square holes and let the two
upper-side claws catch the side panel to fix
the MD cover in the unit.
8. Cleaning the heads and tape running
surface
Clean the tape running surfaces of the drum and
video heads with cleaning cloth moistened with
cleaning fluid.
Adjustment after replacement
9. Tape path adjustment
(Refer to Section 8-2.)
10. RF switching position adjustment
(Refer to Section 8-3.)
11. EQ adjustment
(Refer to Section 5-3-5.)
DSR-2000/2000P
Claw
Claw
MD cover
Claw
Claw
Square hole
7-2. Drum Replacement
7-7