Remove Loading-Gear/Loading-Motor - Clarion MAX668RVD Service Manual

Remove LOADING-GEAR/LOADING-MOTOR

1. Remove six LOADING-GEARS in the following order.
(1) > (4) > (3) > (2) > (5) > (6)
2. Remove two SCREWS,and remove LOADING-MOTOR-
ASSY.
Loading-Motor-ASSY
Loading-Gear(1)
Loading-Gear(6)
Loading-Gear(5)
Loading-Gear(3)
Loading-Gear(4)
3. Remove SLIDE-LEVER-SPRING, and remove SLIDE-
LEVER and CLAMP-RACK
Slide-Lever-Spring
Clamp-Rack
Slide-Lever
4. Remove SUSPENSION-LOCK-LEVER(L)-SPRING and
SUSPENSION-LOCK-LEVER(L)
5. Remove SUSPENSION-LOCK-LEVER(R) and UPPER-
SPRING.
6. Remove three DAMPERS.
Suspension-Lock-Lever(L)
Suspension-Lock
-Lever(L)-Spring
Damper
Screw
Loading-Gear(2)
Suspension-Lock-
Lever(R)
Upper-Spring
Damper
Damper
- M7 -
[NOTE]
When assembling, set the dot marks of LOCK-GEAR(1)
and MAIN-CHASSIS.
Gear(1)
Suspension-Lock-Lever(L)
929-2506-00