Disassembly; Remove Servo-Pwb; Remove Upper-Chassis; Remove Suspension-Assy - Clarion MAX668RVD Service Manual

DISASSEMBLY

Remove Servo-PWB

1. Solder two points of FPC to prevent destruction with static
electricity.
Servo PWB side
2. Remove FCPs from PICK-UP-UNIT and SENSOR-FPC-
ASSY.
3. Remove three SCREWS.
4. Remove the connector of LOADING-MOTOR-ASSY.
FPC from Pick-Up-Unit
Screw
Sensor-FPC-ASSY
5. Remove FPC of SPINDLE-MOTOR-ASSY.
FPC from Spindle-Motor
Servo-PWB

Remove UPPER-CHASSIS

1. Remove four SCREWS and WORM-GEAR-HOUSING-
SPRINGS.
Screw
Screw
Loading-
Gear(1)
Worm-Gear-Housing-Spring
[NOTE]
When assembling,insert the shaft of LOADING-GEAR
to the hole of UPPER-CHASSIS.
929-2506-00
Solder points
Pick-up side
Screw
Loading-Motor-ASSY
Upper-Chassis
Screw
Screw
Screw

Remove SUSPENSION-ASSY

1. Remove EARTH-SPRING and OFFSET-SPRINGS.
Offset-Spring
2. Remove LOADING-GEAR(1).
3. Move CLAMP-RACK to GEAR side(Point "A").Pull
LOADING-GEAR(3) up, and rotate it until the lock is
released(Point "B").
4. Return LOADING-GEAR(1) to the original position.
Clamp Rack
Loading Gear(3)
5. R e m o v e S U S P E N S I O N - A S S Y , S U S P E N S I O N -
SPRINGS and SUSPENSION-SPRING(F).
Suspension
-Spring
- M6 -
Earth-Spring
Offset-Spring
Suspension-ASSY
Loading Gear(1)
Loading Gear(2)
Suspension-ASSY
Suspension Spring(F)