Add / Edit Alarm Rule - Abus TVIP11561 User Manual

11.9.1. Add / edit alarm rule

an alarm rule consists of a trigger, a schedule for applying the rule and an action.
Trigger:
Schedule:
Action:
Note
With the FTP/SD/NAS upload action, single frames are stored. For this purpose, the event-
triggered snapshot must be configured in the Storage -> Snapshot menu.
Finished:
Select a trigger for the alarm rule from the list. Only one trigger can be
configured for each rule.
an alarm rule can be enabled in 30 minute intervals. This is highlighted
directly in the matrix on the left (red = enabled).
Delete all: deletes the entire schedule.
Mark all: selects the entire schedule.
one or more actions can be defined for the rule on this page.
On this page, you can see an overview of all the data.
Save settings: Save the configured alarm rule.
50
English