Nat; Https - Abus TVIP11561 User Manual

11.2.8. NAT

Port Mapping Mode:

11.2.9. HTTPS

Activate HTTPS:
The camera generates a self-signed certificate during the first boot process. You can use this certificate
immediately.
Note
In order to access the camera via HTTPS, you must always enter
address line in front of your camera's IP address.
Because it is a self-signed certificate, the browser will usually tell you that the certificate
you are using is not trustworthy. Continue here and trust the certificate in order to use the
HTTPS connection with the camera.
You can also delete the existing certificate and insert a certificate you have created, insert an official
certificate or create your own certificate directly on the camera.
You can also download the certificate and install it on your PC to prevent the browser from issuing a
warning on first access.
Manual: manual assignment of all ports
Auto: automatic assignment of all ports
enables the HTTPS function. This enables a secure connection with
connection certificate. Please note that further steps are necessary for
configuring the HTTPS function.
35
English
on your browser's
https://