Table of Contents
Advertisement
11.5. Date & time
Menu
Date & time
Time zone:
NTP:
Server Address:
NTP port:
Interval:
Manual:
PC time synchronisation:
Enable DST:
Camera type supported
TVIP11561, TVIP21560, TVIP41560, TVIP61560
here, select the time zone in which the camera is located.
enable NTP to synchronise the date and time of the camera with an
NTP time server.
enter the server address or the IP address for the NTP server here. A
standard server is already set up and can be adjusted if required.
enter the NTP port here. The standard port for NTP is 123.
select an update interval.
manual setting of date and time. Click in the date/time field to open a
configuration menu.
use the current PC time currently being used for access (after saving
the settings).
enable DST if there is generally a summer time/winter time changeover
at the camera location.
39
English
Advertisement
Table of Contents
