Table of Contents
Advertisement
7.2. Live view – buttons
You can use the buttons on the bar at the bottom to perform various live operations. If you click on a
button, it will light up.
Depending on the camera type, some buttons may not be visible or cannot be used.
Instant image function
This function saves an instant image from the current video stream in JPEG
format (see Local Configuration for save location).
Video function
This function saves a video from the current video stream in AVI format (see
Local Configuration for save location).
Enable two-way audio
Enables the camera's loudspeaker/audio output and microphone.
Enable audio
Enables the camera's microphone. The camera's stream type must be set to
"Video & Audio".
Trigger Alarm Output
Enables the camera's alarm output.
Full screen mode
Switching the live view on the monitor to full screen mode (you can also do
this by double clicking within the video frame). You can exit full screen
mode by double clicking within the video frame again or pressing the ESC
button.
Alarm input display
Indicates whether the camera's alarm input is active or inactive.
(The display does not update automatically. If the status has changed, this
will only be visible when the page is updated)
PTZ control
Use this button to open the camera's PTZ control
21
English
Advertisement
Table of Contents
