Channel Setup - Philips DVD740VR Owner's Manual

DVD740VR 4/12/02 12:08 PM

24 Channel Setup

Although your DVD/VCR may automatically memorize the chan-
nels you receive when you turn it on for the first time, you can
set up the channels again.
Before you begin, place the DVD/VCR in VCR mode. Press
OUTPUT SELECT so the green VIDEO light appears on the
front of the DVD/VCR. Press VCR/TV so the green VCR/TV
light appears on the front of the DVD/VCR.
1
Press VCR, then press DISC/MENU.
SELECT op CHOOSE B
PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
2
Press PLAY B (o) or STOP C (p) to select
TUNER SET UP, then press FF g (B).
SELECT op CHOOSE B
AUTO PROGRAMMING
ADD/DELETE CH
CH MEMORY REVIEW
TV STEREO
2ND AUDIO
TO END PUSH EXIT
3
Press PLAY B (o) or STOP C (p) to select AUTO
PROGRAMMING, then press FF g (B). The
DVD/VCR will memorize all the channels you receive.
AUTO CH PROGRAMMING
IN PROCESS
PLEASE WAIT
START
4
Wait for a few minutes while the DVD/VCR sets up
the channels. When this is complete, CHANNELS ARE
SET will appear on the screen. Then the programming of
the lowest channel number placed in the DVD/VCR's
memory will appear on the screen. Now when you press
CHANNEL/SKIP j/i (p/o), you will scan only
through channels you receive. You still can select any chan-
nel number using the Number buttons.
Page 24
ON
FINISH
MARKER
SETUP AUDIO SUBTITLE
REC/OTR REPEAT
CHANNEL/SKIP
CLEAR
TITLE MODE
1
OUTPUT SELECT
DVD
DISC
MENU
2,3
STOP
REW
PAUSE
1 2 3
4
5 6
7 8 9
+ 10 0
SEARCH MODE DISPLAY ZOOM
TIME SEARCH STATUS/EXIT
Helpful Hints
• You cannot enter the TUNER SET
UP menu when you are in Line
Input mode (channel 001 or 002).
When you select channel 001 or
002, AV REAR or AV FRONT will
appear on the screen briefly.
• You cannot program channels if you
are using a Cable Box or DBS.
• If you have an antenna, channels 2-
69 will be available. If you have
Cable TV, channels 1-125 will be
available.
POWER
ANGLE
REPEAT
A-B
RETURN
VCR
OK
PLAY
FF
TIMER SET
VCR/TV
MEMORY
SPEED
SLOW