Philips DVD740VR Owner's Manual page 13

Digital video disc player & video cassette recorder
Hide thumbs Also See for DVD740VR:
Table of Contents

Advertisement

DVD740VR
4/12/02
12:08 PM
DVD/VCR to a TV and to a Stereo Receiver that is Dolby Digital-compatible
1
VIDEO IN
Back of TV (example only)
1
Connect the antenna or Cable TV signal to the ANT-IN (Antenna In)
jack of your DVD/VCR.
2
Connect a coaxial digital audio cable (not supplied) to the DVD/VCR's
COAXIAL DIGITAL AUDIO OUT jack and to the COAXIAL DIGI-
TAL AUDIO IN jack on the Stereo Receiver.
This digital audio connection only provides sound for the DVD Player of the DVD/VCR. So, in
order to use the VCR features or view TV channels at the DVD/VCR, you still need to either
connect the RF coaxial cable between the ANT-OUT jack of the DVD/VCR and the TV's
Antenna In jack, or connect the supplied red/white audio cables. To connect the supplied RF
coaxial cable, see step 2 on page eight. To connect the red/white audio cables, see step 2 on
page 11.
3
Connect the supplied yellow video cable to the yellow DVD/VCR
VIDEO OUT jack on the DVD/VCR and to the VIDEO IN jack on the
TV. To use component video cable or S-Video cable instead for the DVD
Player, see pages 11-12. You will still need the yellow video cable or RF coaxial
cable for VCR features.
4
Plug in the power cords of the stereo receiver, TV, and DVD/VCR.
Turn on the stereo receiver and select its Auxiliary IN channel. Turn
on the TV and set it to the correct Video In channel.
5
You are ready to turn on the DVD/VCR. Go to page 15 before turning on
the DVD/VCR.
Remember...
Some DVDs are recorded in 5.1 channel Dolby Digital Surround. Select 5.1 channel
Dolby Digital Surround Sound in the DVD Disc menu.
If you connect the DVD/VCR to a Dolby Digital Stereo Receiver, set DOLBY DIGITAL
to ON in the DVD Player's Setup menu. Details are on page 70. If the DVD/VCR is not
connected to a Dolby Digital-compatible Stereo Receiver, set DOLBY DIGITAL to OFF.
Incorrect settings may cause noise distortion and damage the speakers.
Page 13
Using Digital Audio connections
1
Antenna/Cable TV
Signal
ANT-IN
ANT-OUT
CH3 CH4
Hookups (cont'd) 13
DVD/VCR
DVD/VCR
COMPONENT
IN
OUT
VIDEO OUT
DVD/VCR
L
Y
AUDIO OUT
DIGITAL AUDIO OUT
AUDIO
S-VIDEO
PCM/MULTICHANNEL
L
Cb
OUT
R
COAXIAL
R
Cr
VIDEO
3
2
Stereo Receiver
COAXIAL
DIGITAL
AUDIO IN

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvd740vr98Dvd player dvd740vr99

Table of Contents